Inpack Industries Private Limited

Most of Universal's semi-automatic filling machines require only a compressed air supply. Semi-automatic filling machines are suitable for filling almost any liquid, from free flowing fragrances to drinks, through to viscous syrups and adhesives and even liquids containing particles such as food products.

Model: IPM-8X

• No. of filling Nozzles: 8
• Body:  Stainless Steel Filling
• Accuracy:  ± 1%
• Filling Speed:  30 to 48bottles/min.
  (Advisable speed for foam material is 4 strokes/min)
• Capacity  500ml to 5,000ml
• Power Required: 420V 50/60Hz 3Phase
• Air required: 8CFM at 6 bar pressureAdditional Features:
  • High precision flow measurement.
  • Self-calibration service, No mechanical calibration required.
  • Self-fault diagnosis.
  • No manual adjustment of gears is required in to achieve the desired calibration since the flow meter picks up signal at each tooth as digital pulse to measure the liquid flow.
  • No manual assembly or disassembly of the flow device and can be installed in any position.
  • No leakage in flow meter and any frequent flow direction.
  • Only 2 ports are used. One for Inlet and another for Outlet where- as piston or chamber types there are 3 ports used.
  • Less wear and tear of parts as it uses only two toothed gear mounted on bearing.
  • Less number of mechanical parts which helps in less or zero maintenance of flow meter.NOZZLE UP DOWN STRUCTURE
  Nozzle up down structure is used for the movement of the Nozzles used to fill the bottles. The movement of the structure is brought about by the geared motor. It consists of lead screw which enables the easy up down movement of the structure. This structure helps nozzles to rest on it and it bears the load of whole nozzle assembly. This structure is also used for the height adjustment of the container in case of change of containers. So no changed parts are required in this oil filling machine even if the size, shape and height of the containers changes. This is the best feature of the machine which reduces the cost of the change parts required in case of container change.

Fillers (or filling machines) are used for packaging, mainly for food/beverage but for other products as well. These are used to fill either a bottle or a pouch, depending on the product. There are several types of fillers used by the packaging industry.